Description

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent   electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement   of the total current.
The measured data can be transmit    in different data formats (mA/A/kW) onto the KNX bus.

• 德国制造, 符合 ISO 9001
• 每个端口都具有电子开关，并有LED状态指示
• 延时功能 (switch-on/switch-off delay, staircase light function)
• 每个通道有状态反馈功能 (主动/被动)
• 每个通道有8个场景
• Hour meter
• Central switching functions and block functions
• Programmable behavior in case of bus voltage failure or return
• Each contact has an own supply phase
• Integrated current measurement (current, kWh, limit value)
• Integrated counted to capture power consumption (Wh/kWh)
• True RMS rating
• 2000 measurements/500ms
• Accuracy is +/- 2% of measured date
• Current measurement range 10mA – 20A
• Power supply via KNX bus
• Integrated bus coupling unit
• 3years warranty

Downloads

          >>> ETS product data (*.vd4)
           >>> Datasheet
         >>> Assembly and operation instructions
              >>> Technical manual

         >>> CAD drawings (*.dxf, *.dwg)