V BACnet Application Specific Controller (B-ASC) as Gateway between KNX TP and BACnet IP
V Up to 250 BACnet objects
V Up to 455 BACnet COV subscriptions
V Automatic translation of KNX communication objects into BACnet objects according to the configuration
with ETS
V For communication between KNX EIB devices and PCs or other devices with Ethernet (10BaseT) interface‚
as well as in conjunction with a LAN modem or DSL router for remote access to an KNX EIB installation
V For use as an interface e.g. for ETS3 or for visualization software
V Use the KNXnet/IP protocol
V Up to four KNXnet/IP Tunneling connections for parallel bus access by ETS and further PC software
V ObjectServer connection for visualization via network connections with long signal transmission duration
V Assignment of the network parameters by the installer using ETS‚ or automatically by a DHCP server
in the network
V 2 LEDs for display of operational availability and IP communication
V Additional power supply by an external safety extra low voltage power supply for DC 24 V
V Pluggable terminal block for connection of external power supply unit (not included)
V Integrated bus coupling unit with bus connection via bus terminal
V Ethernet connection via RJ45 socket
V Mounting on DIN rail EN 60715-TH35-7.5

Visualization controller for full-graphic visualizations on web-compatible end devices such as PCs‚ laptops‚
tablets and smart phones with a standard web browser.
V Web server to operate and monitor up to 250 transmitted operation states and values
V Web editor for graphic engineering of web visualization and application modules such as:
– Scheduler program with up to 300 editable commands per week
– Scene module with up to 5‚000 scenes or events
– Full-graphic logic module providing up to 1‚000 logic functions
– Alarm function for up to 250 different alarm messages
– E-mail function with up to 20 contacts
V Special web site relating to firmware upgrade
V KNXnet/IP interface to parameterize a KNX plant
V Ethernet interface 10/100 Mbits/s with RJ45 socket for connection to the IP network through the internet
protocol
V 2 LEDs for indication of IP connection/communication and error messages
V Built-in bus coupler and bus terminal for connection to a KNX network
V Power supply for electronics via external DC 24 V power source. Connection of external power source
via low-voltage terminal
V Device for top hat rail mounting on TH35 rails conforming to DIN EN 60715

Interface converter between a KNX and an IP network‚ with the following simultaneously executable
functions:
– As a WebServer for monitoring and control of up to 40 states and values transmitted via the KNX network‚
which can be displayed on up to 5 image pages of a PC connected to the IP network using Internet
Explorer 6.0‚ 7.0‚ 8.0 or Firefox 3.0 (for other browsers‚ see documentation at www.siemens.
com/gamma-td)
– For the parameterization of a KNX system using ETS3.0f/ETS4
– For communication between the KNX network and a ComBridge Studio visualization software
V Special WEB page for the multilanguage adaptation of the presentation of an image page and a special
WEB page for firmware upgrades
V Ethernet interface for connection to the IP network using the Internet Protocol
V RJ45 socket for connection to Ethernet 10 Mbits/s
V 2 LED displays for indication of ready-to-run state and for IP communication
V Integrated bus coupling units
V KNX bus connection via bus terminal
V Electronics powered via an external 24 V AC/DC power supply unit
V Connection of external power supply unit via an extra-lowvoltage terminal
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

V LEDs for indicating that the device is ready-to-run‚ KNX communication‚ IP communication
V Electronics powered via an external nominal 24 V AC/DC power supply unit
V Power consumption at 24 V DC‚ 57 mA
V Power supply for the electronics via “Power over Ethernet” according to IEEE 802.3af
V Integrated bus coupling units‚ Bus connection via bus terminal
V Ethernet connection via RJ45 socket
V Plug-in terminal block for the connection of an external power supply unit
V Supports KNXnet/IP
V 4 Interface functions (Tunneling)
V 1 Interface functions (object server)
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

V LEDs for indicating that the device is ready-to-run‚ KNX communication‚ IP communication
V Electronics powered via an external nominal 24 V AC/DC power supply unit
V Power consumption at 24 V DC 57 mA
V Power supply for the electronics via “Power over Ethernet” according to IEEE 802.3af
V Integrated bus coupling units
V Bus connection via bus terminal
V Ethernet connection via RJ45 socket
V Plug-in terminal block for the connection of an external power supply unit
V Supports KNXnet/IP
V Line coupler function (Routing)
V 4 Interface functions (Tunneling)
V 1 Interface functions (object server)
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

V For data exchange between two KNX bus lines with telegrams of up to 64 byte
V For use as line coupler for connecting a line to the main line or as backbone coupler for connecting a
main line to the backbone line or as repeater for connecting two segments of the same line‚ with electrical
isolation of the two bus lines
V Loadable filter table for control of the data exchange between the two bus lines
V Additional loadable filter table for telegrams with LTE addressing
V Detection of a communication fault on the lower-level line and signaling to the higher-level line
V 3 LEDs for display of availability and receipt of a telegram per line
V Power supply from the main line
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

Dimension width (1 MW = 18 mm) 1 MW
Bus connection Via bus terminal
Via data rail

V Electronics powered via bus voltage or via USB by a connected PC
V Integrated bus coupling units
V Bus connection via bus terminal or contact system to data rail
V Transmission PC D USB USB 1.1 or higher
V Electrically isolated access to the bus line via integrated socket USB (Typ B)
V Access to all bus devices in the system
V Modular installation devices for mounting on TH35 EN 60715 mounting rail