8 channels
V For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with
a motor for AC 230 V and electromechanical limit switches
V Rated contact voltage AC 230 V‚ 50 Hz
V Configurable behavior in the event of a bus voltage failure
V Configurable behavior in the event of a system voltage recovery
V Automatic mode for sunlight tracking control
V Manual mode
V Indication of direct operation with status object
V Status position of slats‚ 8-bit
V Integrated 1-/8-bit-scene control‚ 8 Scenes to be integrated per channel
V Suitable for integration in a sunlight tracking control system
V Sun protection control (up/down) using position data (8-bit value)
V Integrated power supply unit for the electronics‚ connected to AC 230 V
V Slat control (open/close) using position data (8-bit value) or travel to end position‚ stopping‚ stepwise
adjustment

V 4 channels
V For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with
a motor for AC 230 V and electromechanical limit switches
V Rated contact voltage AC 230 V‚ 50 Hz
V Automatic mode for sunlight tracking control
V Manual mode
V Indication of direct operation with status object
V Status position of slats‚ 8-bit
V Suitable for integration in a sunlight tracking control system
V Sun protection control (up/down) using position data (8-bit value)
V Integrated power supply unit for the electronics‚ connected to AC 230 V
V Slat control (open/close) using position data (8-bit value) or travel to end position‚ stopping‚ stepwise
adjustment

V 4 channels (one up and one down each)
V Rated contact voltage AC 230 V‚ 50 Hz
V Integrated 1-bit scene control‚ 2 Scenes to be integrated per channel
V Integrated power supply unit for the electronics‚ connected to AC 230 V
V Separate raising/lowering protection

V 4 channels
V For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with
a motor for AC 230 V and electromechanical limit switches
V Rated contact voltage AC 230 V‚ 50 Hz
V Status position of slats‚ 8-bit
V Integrated 1-bit scene control‚ 2 Scenes to be integrated per channel
V Separate raising/lowering protection
V Integrated power supply unit for the electronics‚ connected to AC 230 V
V Sun protection control (up/down) using position data (8-bit value)

For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with
a motor for AC 230 V and electromechanical or electronic limit switches
V Integrated electronics for detection of the actuation of an electromechanical limit switch and with
auto-calibration of the travel time from one limit switch to the other
V Electrically interlocked relays to reverse the direction of rotation
V Relay contacts rated for nominal voltage AC 230 V‚ 8 A (resistive load)
V Configuration by the user whether all actuator channels are to be identically or individually parameterized
V Communication objects per actuator channel for moving the sun protection to the limit positions or
to stop travel and for step-by-step adjustment of the blind slats
V Communication objects for moving the sun protection and adjusting the blind slats directly to a new
position (as precisely as drive mechanics permit) by positioning commands as percentage values
V Automatic opening of blind slats up to a set position after the blinds have been lowered without any
stop from the upper to the lower limit position
V Integrated 1-bit scene control for save and recall of 2 favored positions of blind and slats
V Integrated 8-bit scene control and assignment of up to 8 scenes per channel
V Optional object “Sunshine” for activation / deactivation of sunlight tracking of the slats for shading
with greatest possible daylight component
V Differentiation between automatic and manual mode and with automatic switchover from automatic
to manual mode of the respective actuator channel on activation of a bus pushbutton for manual control
of the sun blind
V Priority of manual mode over automatic positioning commands
V Alarm object per device or per channel for moving the sun protection to the configured safety position
in the event of a wind alarm e.g. and with blocking of travel to another position as long as alarm pending
V Travel blocking object per device or per channel for blocking the sun protection in its current position
(needed during cleaning of an outdoor Venetian blind e.g.)
V Status objects per actuator channel for query or automatic transmission of sun blind and slat position
as percentage value
V Electronics powered via an integrated power supply unit for AC 230 V
V Green LED for displaying the 230 V operating voltage
V Pushbutton for switchover between bus mode and direct mode
V Yellow LED for display of activated direct mode
V Two pushbuttons each per actuator channel for drive control in direct mode
V Integrated in the actuator housing and operational if the actuator is supplied with AC 230 V (even if
bus voltage missing or communication not operational)
V Integrated bus coupling unit with only half a standard bus load
V Bus connection via bus terminal or contact system to data rail
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

Can be operated per channel as a pure switching/dimming actuator or as a constant light controller in
master or slave operation mode
V 3 switch outputs for the connection of max. 30 electronic ballasts for 2 x 36 W FL/max. 20 electronic
ballasts for 1 x 58 W FL or max. 15 electronic ballasts for 2 x 36 W FL/max. 10 electronic ballasts for 2
x 58 W FL
V 3 control voltage outputs DC 1-10 V for the connection of max. 50 dimmable electronic ballasts
V 3 inputs for the connection of one brightness sensor GE 255/x each via a 3-core‚ max. 100 m long
cable‚ which is also used as a power supply for the sensor electronics
V Communication objects for sending the measured brightness values
V Communication objects per actuator channel to control the following operating modes: comfort
mode‚ automatic mode and night operation as well as switching‚ dimming and value setting
V Time-dependent activation of the lighting during night operation (lighting for cleaners)
V Automatic toggling from automatic to manual operation of the relevant actuator channel when the
bus push button is pressed for manual switching and dimming of this channel (constant light control
inactive during manual operation)
V Status objects per channel for switching state or dimming value
V Integrated power supply unit for AC 230 V‚ 50 Hz to supply the actuator electronics and a green LED
for operational display
V Push button per actuator channel for local switching of the outputs or for starting a calibration of the
sensor‚ integrated in the actuator housing and able to function even when the bus cable is not
installed and when there is a failure of the bus communication
V Connection of the 230 V supply voltage and all the outputs/inputs via screw terminals 0.5 … 4 mm
V Integrated bus coupling unit‚ bus connection via bus terminal
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

V Communication via KNX EIB with electronic ballasts (ECG) with a DALI interface
V Two (2) DALI output acc. to IEC 60929‚ each for communication with up to 64 DALI ballasts and at
least 10 sensors
V Integrated power supply with input voltage 110…240 V AC‚ 50…60 Hz or 120…240 V DC for powering
the gateway electronics and DALI output
V Maximum DALI output voltage of 19 V‚ short circuit resistant
V Incorrect voltage detection during commissioning‚ whether incorrect power line is connected to a
DALI output
V LC display for displaying operation mode and error messages
V Pushbutton for switching between bus and direct operating mode
V One pair of push buttons for switching On/Off of all connected DALI ballasts
V One LED per DALI output for status signal of all connected luminaries in direct mode
V Configurable assignment of max. 128 DALI ECG to max. 32 DALI groups‚ exclusive controlled in groups
(switching‚ dimming‚ set dimming value) and feedback for group status and lamp failure
V Configurable behaviour for bus failure (stand-alone mode)
V Control (switching‚ dimming‚ set dimming value) of all connected luminaries together in broad-cast
mode
V Status signal and display of lamp and ECG failure per group and per DALI device
V Possibility to reintegrate defective DALI ECG without software
V One or two level timer
V Integrated scene control for up to 32 scenes
V 16 integrated 2-level-controller for brightness control
V Assignment of DALI ECG to groups and test option for ECG‚ groups and scenes via ETS during commissioning
V Assignment of DALI sensors and test option of sensors via ETS during commissioning
V Integrated bus coupling unit with only half a standard bus load‚ bus connection via bus terminal
V Mounting on DIN rail EN 60715-TH35-7.5