Venetian blind actuator‚ 4 x AC 230 V‚ 8 A‚ with limit position detection and sunlight tracking N 522/03

For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with
a motor for AC 230 V and electromechanical or electronic limit switches
V Integrated electronics for detection of the actuation of an electromechanical limit switch and with
auto-calibration of the travel time from one limit switch to the other
V Electrically interlocked relays to reverse the direction of rotation
V Relay contacts rated for nominal voltage AC 230 V‚ 8 A (resistive load)
V Configuration by the user whether all actuator channels are to be identically or individually parameterized
V Communication objects per actuator channel for moving the sun protection to the limit positions or
to stop travel and for step-by-step adjustment of the blind slats
V Communication objects for moving the sun protection and adjusting the blind slats directly to a new
position (as precisely as drive mechanics permit) by positioning commands as percentage values
V Automatic opening of blind slats up to a set position after the blinds have been lowered without any
stop from the upper to the lower limit position
V Integrated 1-bit scene control for save and recall of 2 favored positions of blind and slats
V Integrated 8-bit scene control and assignment of up to 8 scenes per channel
V Optional object “Sunshine” for activation / deactivation of sunlight tracking of the slats for shading
with greatest possible daylight component
V Differentiation between automatic and manual mode and with automatic switchover from automatic
to manual mode of the respective actuator channel on activation of a bus pushbutton for manual control
of the sun blind
V Priority of manual mode over automatic positioning commands
V Alarm object per device or per channel for moving the sun protection to the configured safety position
in the event of a wind alarm e.g. and with blocking of travel to another position as long as alarm pending
V Travel blocking object per device or per channel for blocking the sun protection in its current position
(needed during cleaning of an outdoor Venetian blind e.g.)
V Status objects per actuator channel for query or automatic transmission of sun blind and slat position
as percentage value
V Electronics powered via an integrated power supply unit for AC 230 V
V Green LED for displaying the 230 V operating voltage
V Pushbutton for switchover between bus mode and direct mode
V Yellow LED for display of activated direct mode
V Two pushbuttons each per actuator channel for drive control in direct mode
V Integrated in the actuator housing and operational if the actuator is supplied with AC 230 V (even if
bus voltage missing or communication not operational)
V Integrated bus coupling unit with only half a standard bus load
V Bus connection via bus terminal or contact system to data rail
V Modular installation devices for mounting on TH35 EN 60715 mounting rail